Heures d'ouverture: Lun - Mer: 10:00 - 17:30   Jeu - Ven: 10:00 - 21:00   Sam: 09:00 - 17:00   Dim: 11:00 - 17:00

MSP Musique

Lévis (St-Nicolas)
140-9, Marie-Victorin
418 831-9010
Lévis
70 Kennedy
418 903-9410

Skip to Main Content »

Search Site

You're currently on:

Electro-Harmonix série Nano switch blade +

Double-cliquez sur l'image ci-dessus pour la voir en entier

Zoom arrière
Zoom avant

Plus de vues

Electro-Harmonix série Nano switch blade +

Envoyer à un ami

Soyez le premier à commenter ce produit

Availability: In stock.

MSP Price: 60,95 $CA

Add Items to Cart
OU

Description rapide

— Controls —
A/B Footswitch (LED) — Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED).

A+B Footswitch (LED) — Press this switch to route the input signal to both OUT A and OUT B. When A+B is engaged (Red LED), the A/B Footswitch has no effect on the signal path.

— I/O —
INPUT — Connect the output of your instrument or another effects pedal to this jack.

TUNER — Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit.

OUT A — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit red or the A+B LED is lit up, OUT A is selected.

OUT B — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit green or the A+B LED is lit up, OUT B is selected.

— Power -
The SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Boss® & Ibanez®) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative.

The SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function.

When A+B is engaged, the input impedance at the INPUT jack is equal to 50kΩ in parallel with the combined input impedances of the devices connected to the TUNER, OUT A, and OUT B jacks. When A+B is not engaged, the input impedance at the INPUT jack is equal to 100kΩ in parallel with the combined input impedances of the devices connect to the TUNER jack and OUT A or OUT B.

Description du produit

— Controls —
A/B Footswitch (LED) — Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED).

A+B Footswitch (LED) — Press this switch to route the input signal to both OUT A and OUT B. When A+B is engaged (Red LED), the A/B Footswitch has no effect on the signal path.

— I/O —
INPUT — Connect the output of your instrument or another effects pedal to this jack.

TUNER — Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit.

OUT A — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit red or the A+B LED is lit up, OUT A is selected.

OUT B — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit green or the A+B LED is lit up, OUT B is selected.

— Power -
The SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Boss® & Ibanez®) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative.

The SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function.

When A+B is engaged, the input impedance at the INPUT jack is equal to 50kΩ in parallel with the combined input impedances of the devices connected to the TUNER, OUT A, and OUT B jacks. When A+B is not engaged, the input impedance at the INPUT jack is equal to 100kΩ in parallel with the combined input impedances of the devices connect to the TUNER jack and OUT A or OUT B.

Informations complémentaires

Nom Electro-Harmonix série Nano switch blade +
Réf. switchblade+
Couleurs N/A
Manufacturiers N/A
Calibre Électrique N/A
Couleurs Kickport N/A
Jay Jr. Acoustique Couleurs N/A
LP Cajon Couleurs N/A
Format N/A
Taille N/A
Prix MSP 60,95 $CA
Prix spécial N/A
Note N/A
Conditions Prendre connaissance des conditions de vente.

Mots clés du produit

Ajouter vos mots clés :
Utilisez un espace pour séparer les mots clés. Utilisez l'apostrophe (') pour rédiger une phrase.
 

Comparer
Produits

Vous n'avez pas d'articles à comparer.