Heures d'ouverture: Lun - Mer: 10:00 - 17:30   Jeu - Ven: 10:00 - 21:00   Sam: 09:00 - 17:00   Dim: 11:00 - 17:00

MSP Musique

Lévis (St-Nicolas)
140-9, Marie-Victorin
418 831-9010
Lévis
70 Kennedy
418 903-9410

Aller au contenu principal »

Rechercher sur le site

Vous êtes actuellement sur :

Plus de vues

  • Electro-Harmonix série Nano switch blade +

Electro-Harmonix série Nano switch blade +

Soyez le premier à commenter ce produit

Disponibilité : en stock.

Prix MSP: 60,95 $Ca

Ajouter les articles au panier
OU

Description rapide

— Controls —
A/B Footswitch (LED) — Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED).

A+B Footswitch (LED) — Press this switch to route the input signal to both OUT A and OUT B. When A+B is engaged (Red LED), the A/B Footswitch has no effect on the signal path.

— I/O —
INPUT — Connect the output of your instrument or another effects pedal to this jack.

TUNER — Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit.

OUT A — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit red or the A+B LED is lit up, OUT A is selected.

OUT B — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit green or the A+B LED is lit up, OUT B is selected.

— Power -
The SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Boss® & Ibanez®) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative.

The SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function.

When A+B is engaged, the input impedance at the INPUT jack is equal to 50kΩ in parallel with the combined input impedances of the devices connected to the TUNER, OUT A, and OUT B jacks. When A+B is not engaged, the input impedance at the INPUT jack is equal to 100kΩ in parallel with the combined input impedances of the devices connect to the TUNER jack and OUT A or OUT B.

Description du produit

— Controls —
A/B Footswitch (LED) — Press this switch to route the input signal to either OUT A (Red LED) or OUT B (Green LED).

A+B Footswitch (LED) — Press this switch to route the input signal to both OUT A and OUT B. When A+B is engaged (Red LED), the A/B Footswitch has no effect on the signal path.

— I/O —
INPUT — Connect the output of your instrument or another effects pedal to this jack.

TUNER — Connect this jack to the input of a tuner device or another effects pedal. This jack is hardwired to the INPUT jack and provides a direct output regardless of the state of the unit.

OUT A — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit red or the A+B LED is lit up, OUT A is selected.

OUT B — Connect this jack to the input of an amplifier or the input of another effects pedal. Depending on the state of the A/B and A+B controls, this jack will output either the direct input signal or no signal. When the A/B LED is lit green or the A+B LED is lit up, OUT B is selected.

— Power -
The SWITCHBLADE+ can be powered by a 9V battery or a 9VDC battery eliminator capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix is 9.6DC-200BI (same as used by Boss® & Ibanez®) 9.6 Volts DC 200mA. The power supply must have a barrel connector with center negative.

The SWITCHBLADE+ can also operate without power, since the audio path is fully passive. With no power, however, the LED indication will not function.

When A+B is engaged, the input impedance at the INPUT jack is equal to 50kΩ in parallel with the combined input impedances of the devices connected to the TUNER, OUT A, and OUT B jacks. When A+B is not engaged, the input impedance at the INPUT jack is equal to 100kΩ in parallel with the combined input impedances of the devices connect to the TUNER jack and OUT A or OUT B.

Informations complémentaires

Nom Electro-Harmonix série Nano switch blade +
SKU switchblade+
Prix MSP 60,95 $Ca
Conditions Prendre connaissance des conditions de vente.

Vous pourriez également être intéressé par le(s) produit(s) suivant(s)

Fender American Vintage '72 Telecaster Sunburst Maple neck

Fender American Vintage '72 Telecaster Sunburst Maple neck

Prix MSP: 1 549,95 $Ca

     

Tags du produit

Ajoutez vos tags :
Utilisez des espaces pour séparer les tags. Utilisez les apostrophes (') pour les phrases.
 

Comparer des
Produits

Vous n'avez pas d'articles à comparer.